Indonesian
Arabic
Chinese (Simplified)
Dutch
English
French
German
Italian
Portuguese
Russian
Spanish
29 Jul Hammer Crusher
Hammer crusher crushes materials by the high-speed rotating of the hammer and the collision of the materials’surface. lt features simple structure , high crushing ratio , high capacity, etc. which can be used for dry and wet crushing. Hammer crusher used for crushing various mid-hard and weak abrasive materials. The compressive strength of the materials do not exceed 100 MPa and water content less than15. lt is widely used for crushing coal , salt, chalk, gypsum, brick, limestone and so on . In addition, the hammer crusher can be used not only in stone production line, sand production line, but also inmineral processing line to replace cone crusher. Hammer crusheris widely applied in mining, cement, coal, metalluray, building materials, roads, fuel, etc. which is for the medium hardness and brittle materials. The hammer crusher can adjust the grate gap to change the output of the material according to users’requirements.
- Hammer crusher is mainly composed of casing, rotor bearing parts, such as iron and grate chassis consists of two parts, steel plate welding and become, after the rest of the parts with bolted together.
- The inside of the casing is lined with manganese steel, which can be replaced after wear.
- A hammer with array rules is installed on the main shaft of a hammer crusher, and the rotor is made up of a rotating discand a hammer shaft.
- By motor, v-belt drive main shaft, so that the rotor rotation, the hammer is generated by the centrifugal force when rotating around open, large pieces of material from the inlet into the crushing chamber, is the hammer of high-speed movement.
- Broken qualified material, on the other hand, there is crack by bottom gas discharge, unqualified stayed incrushing cavity, a hammer and bearing iron repeatedly, untilit can discharge
Broken than large, high production efficiency, strong applicability, can according to customer's requirements, adjust the size of need, the overall design beautiful shape, compact structure, less wearing parts, convenientmaintenance, is the upgrading products. Without the bottomof the screen grate, moisture content does not have anyrequirements tor the material, not paste plugging of thesieve plate problems, there is no more material not discharge in time, repeat crushing problems; The hammer broke the structural seal of the body and solved the dustpollution in the broken workshop and the problem of theair frame leakage. The bearing box is made of cast steel, and with four screws, the science is practical. The hammer head adopts the new process casting, which has wear-resistingand impact resistance.
No Comments